SC600K

SC600K is the second strongest hoist in Scanclimber Light-weight industrial hoists product family with loading capacity 8 persons or 600 kilograms and lifting speed from 36 to 60 m/min. Since the hoist design is modular SC600K can bee design to meet the requirements of the specific location and its enviroment.

HOIST GAGE internal footprint size is 1020×1490 mm with a height of 2090 mm. Gage can be equipped with a front door, back door and big side door.

GROUND STATION need to be bolted on a concrete or similar foundation. The SC600K ground station is equipped with one door but there are optionally available a back door and a wider side door.

SC600K LIGHT-WEIGHT industrial hoist is available with two lifting motors.

3 DIFFERENT MAST TYPES are available. All mast sections are 1508 mm high. Mast type is selected according to mast height and anchoring distance.

Technical Data	SC600K
Payload	600 kg or 8 persons
Speed	36 m/min 60 m/min
Lifting height	≤ 200 m
Max. free mast after topmost anchoring	5 m
Max. distance between anchors	12 m
Weight of the mast section	134 kg
Weight of the lift car	1100 kg
Operation temperature	-25°C – +45 °C
Noise level to the surroundings [dB (A)]	Max. 80 dB

Electrical Data	SC600K
Number of lifting motors	2
Motor rating	11 kW
Starting current	40 A
Power consumption	10 kW
Supply voltage	230/400 V AC 50 Hz
Lift control voltage safety control circuits	48 V AC 24 V DC
Lighting circuit voltage	230 V AC 50 Hz
Signal circuit voltage lamps buzzer	48 V AC 12 V AC
Permissible voltage variation	±5 %
Fault mode current protection	residual current device

Technical Data for the Lift Car and Lifting Mechanism	SC600K
Car (internal) width depth height weight	1020 mm 1490 mm 2090 mm 1100 kg
Mast section length load bearing tubes spacing mast bolts weight	1508 mm 650 mm M20 x 260-10.9 – 4 pc./section 134 kg
Electric motor type nominal power rated speed supply voltage rated current weight	DV132ML4 – SEW 11 kW 1440 [1/min] 230/400 V – 50 Hz 18,1 A 75 kg
Brake operating principle type braking torque weight	Disk type, electro magnetically switched BM15/HR – SEW 75 Nm 25 kg
Gear type gear ratio weight	KF77 – SEW 1:15.84 60 kg
Driving pinion module number of teeth rotation speed	6 mm 20 91 [1/min]
Safety brake operating principle type tripping speed weight	Progressive, centrifugal action UC – 3.0 A 0,9 m/s 32,5 kg

HOME / CONSTRUCTION HOISTS / INDUSTRIAL ELEVATORS / WAREHOUSE ELEVATORS / MAST CLIMBERS / USED EQUIPMENT / PRIVACY POLICY / CONTACT US

CONTACT DE JONG HOISTS

(08) 9241 6000

CONTACT DE JONG HOISTS

(08) 9241 6000

SC600K